Vacuum Tubing
Accuflow Systems Saint-Gobain Fuel and Lubricant Tubing, PVC, 1/4 in, 50 ft
Flexible tubing formulated for fuel and lubricant transfer that resists swelling, hardening, and embrittlement caused by hydrocarbon-based fluids. Translucent yellow construction allows visual flow monitoring. Supplied in 50 ft coils for small-engine and industrial fluid transfer applications.
- Resists swelling and hardening from hydrocarbon fuels.
- 1/4 in inner diameter, 3/8 in outer diameter, 1/16 in wall thickness.
- Translucent yellow for easy flow monitoring.
- Maximum recommended operating temperature 165°F (74°C).
- Maximum working pressure 30 psi at 73°F.
- Bend radius approximately 1 in for routing in tight spaces.
- Sold in 50 ft package length.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/16 in ID, 1/8 in OD
Saint-Gobain PharMed BPT peristaltic pump tubing provides a biocompatible fluid-contact surface, extended pump life compared with silicone, and resistance to common sterilization methods suitable for bioprocessing and laboratory fluid transfer.
- Formulated thermoplastic elastomer for peristaltic pumping.
- Dimensions: 1/16 in ID, 1/8 in OD, 1/32 in wall, 25 ft length.
- Opaque cream color to protect light-sensitive fluids.
- Meets USP Class VI and ISO 10993-5 biocompatibility requirements.
- Sterilization: autoclavable (30 min at 121 °C), tolerant to 50 kGy gamma radiation.
- Maximum service temperature 275 °F (135 °C); low temperature embrittlement at -75 °F (-59 °C).
- Max working pressure 24 psi at 73 °F, 14 psi at 180 °F; vacuum rating 29.9 in Hg.
- Typical uses: cell harvest, bioreactor lines, aseptic filling, filtration, and diagnostics.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP PVC, 3/8 in ID, 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tube formulated without DEHP for laboratory and medical fluid-transfer applications. It provides high clarity for visual inspection, consistent lot-to-lot performance, and mechanical properties suitable for peristaltic pumps, vacuum lines, and general laboratory use.
- 3/8 in (9.5 mm) inner diameter, 5/8 in (15.9 mm) outer diameter, 1/8 in (3.2 mm) wall thickness.
- 50 ft (15 m) packaged length.
- Non-DEHP, phthalate- and BPA-free PVC formulation.
- Shore A hardness 56, tensile strength 1750 psi, ultimate elongation 425%.
- Maximum recommended temperature 165 °F (74 °C); brittle temperature -51 °F (-46 °C).
- Maximum working pressure 25 psi at 73 °F; vacuum service to 29.9 inHg.
- Minimum bend radius 1-1/8 in (28.6 mm) for standard sizes.
- Smooth inner surface for low contamination and reliable fluid flow.
Accuflow Systems Saint-Gobain C-Flex Braided Tubing, TPE, 0.500 in ID, 15 ft
Saint-Gobain C-Flex TPE braided tubing is a reinforced thermoplastic elastomer tube engineered for high-pressure fluid processing in pharmaceutical and biopharmaceutical applications. The tubing provides crush and kink resistance for vessel and tank transfers, filter integrity testing, and other elevated-pressure fluid handling.
- Thermoplastic elastomer (ADCF) material with polyester fiber reinforcement.
- Inner diameter 0.500 in (12.70 mm).
- Outer diameter 0.750 in (19.05 mm).
- Wall thickness 0.125 in (3.18 mm).
- Package length 15 ft (4.6 m).
- Temperature range -67°C to 135°C (-85°F to 275°F).
- Maximum working pressure 105 psi (7.2 bar) at 20°C (68°F).
- Translucent color for visual flow inspection.
- Suitable for high-pressure fluid transfer and filter integrity testing.
Accuflow Systems Saint-Gobain Tygon E-3603 Tubing, Thermoplastic, 3/4 in ID, 50 ft
Saint-Gobain Tygon E-3603 tubing is a clear, flexible thermoplastic tubing designed for vacuum and laboratory fluid transfer applications where chemical compatibility, visual inspection, and low extractables are required. The tubing provides a glassy-smooth inner bore to reduce buildup, high flex-fatigue and abrasion resistance, and reliable vacuum performance at room temperature.
- Clear thermoplastic construction for visual inspection.
- 3/4 in inside diameter, 1 1/2 in outside diameter, 3/8 in wall thickness, 50 ft package length.
- Glassy-smooth inner bore minimizes buildup and carryover.
- Maintains vacuum integrity at room temperature in standard sizes.
- Non-oxidizing, non-contaminating formulation to reduce extractables.
- BPA- and phthalate-free; REACH and California Prop 65 compliant.
Accuflow Systems Saint-Gobain Silicone Tubing, Platinum-Cured, 0.156 in ID, 0.41 in OD
Sani-Tech STHT-C platinum-cured silicone tubing designed for sanitary biopharmaceutical fluid transfer. The product provides a smooth, ultra-pure bore, good thermal stability, and traceability marking for sizes with ID ≥ 1/16 in.
- Platinum-cured silicone material, biopharmaceutical grade.
- Inner diameter 0.156 in (3.97 mm), outer diameter 0.41 in (10.32 mm).
- Wall thickness 0.13 in (3.18 mm), 25 ft coil standard.
- Durometer hardness 50 Shore A for the STHT-C formulation.
- Autoclavable and resistant to adherence of blood and sanitary fluids.
- Laser marked for part number and lot code traceability on IDs ≥ 1/16 in.
- Suitable for pharmaceutical and biopharmaceutical fluid transfer and single-use assemblies.
Accuflow Systems Saint-Gobain Tubing, 1/2 in ID, 3/4 in OD, 50 ft
Tygon 2475 IB tubing is a crystal-clear, plasticizer-free thermoplastic tubing engineered for high-purity and medical fluid transfer applications. It minimizes extractables, offers low gas permeation compared with silicone, and meets USP Class VI biocompatibility standards. Typical uses include diagnostic reagent delivery, medical dispensing, cell and tissue culture transport, and cleanroom transfer lines.
- Plasticizer-free thermoplastic construction minimizes extractables and leachables.
- Crystal-clear wall enables visual inspection of the fluid path.
- Smooth inner bore limits protein and particle retention.
- Lower gas permeation than silicone, suitable for sensitive fluids.
- 1/2 in ID, 3/4 in OD, 1/8 in wall, 50 ft length for long runs.
- Designed for high-purity pressure applications and meets USP Class VI biocompatibility.
Thermo Scientific PVC Pump Hose Tubing Pack of 12
Orage/green 0.381 diameter flexible polyvinyl chloride plastic tubing for pumps with good chemical resistance but temperature limitations, not for food contact. Suit your sample matrices and applications with this comprehensive range of Thermo Scientific™ Peristaltic Pump Tubing for the Thermo Scientific™ iCAP™ Q/Qnova Series ICP-MS systems; all designed for durability and fitness for purpose.
Accuflow Systems Saint-Gobain Tygon Tubing, Medical, 1/32 in ID, 3/32 in OD
Tygon S-50-HL medical tubing is a hemocompatible, flexible tubing formulation developed for blood-contact medical applications and procedures requiring reliable peristaltic pump performance. The tubing provides clear flow visualization, USP Class VI biocompatibility, and established use in bypass and surgical applications.
- Hemocompatible tubing suitable for blood-contact applications and bypass procedures.
- Meets USP Class VI biocompatibility; passes hemocompatibility testing.
- Compatible with peristaltic pumps for consistent flow and low mechanical wear.
- Dimensions: 1/32 in ID, 3/32 in OD, 50 ft coil.
- Clear, flexible compound for visual monitoring and reliable durability.
